caelgo2t.gif (2717 bytes)     CAE PAS STEREO PREAMPLIFIER SPECIFICATIONS
LINE STAGE AMPLIFIER SPECIFICATIONS (#PWB / ASM-5AH)
Frequency Response 5 Hz - 160 KHz +/- 0.05db
Separation > 85db to 20 KHz
THD 0.045 % @ 1 KHz
IM 0.03 % SMPTE
Gain 20 db Adjustable to 30db
Signal to Noise Ratio 0.4 uV (RMS) -68db
Input Impedance 1 MEG Ohm Adjustable
Output Impedance 300 Ohms
Output Voltage 180 Volts P-P
Tube Compliment 1 X E81CC Alt 1X 6922 / 7308
Power Requirement 12.6 VDC @ 300 mA Filament
250 VDC @ 20 mA (Regulated) High Voltage (B+)
Board Dimensions  (Drop In PAS Line Amp) 5.5" X 3-7/8"
PHONO STAGE SPECIFICATIONS (#PWB / ASM-6A)
Frequency Response 20 Hz - 20 KHz RIAA: +/- 0.05 db
Separation > 85 db to 20 KHz
THD 0.035 % @ 1 KHz
IM 0.02 % SMPTE
Gain 30 db @ 1 KHz
Signal to Noise Ratio 0.31 uV (RMS) -73 db
Input Impedance 47 K Ohm Adjustable
Output Impedance 2.2 K Ohms
Output Voltage 145 VAC (P-P)
Tube Compliment 2 X 6922 Alt: 2 X 7308
Power Requirements 12.6 VDC @ 300 mA Filament
250 VDC @ 15mA High Voltage (B+)
Board Dimensions Drop In PAS Phono Board 5.5: X 3-7/8"
POWER SUPPLY / REGULATOR SPECS (#PWB/ASM-7A)
Power Requirements 110 VAC 100 mA
330 VAC 50mA
Regulated Output 12.0 VDC @ 1A Filament
250 VDC @ 50 mA High Voltage (B+)
Output Impedance @ Zout = 0.0015 Ohms B+ Supply
Board Dimensions Dyna PAS Drop In 7-3/8" X 2-1/2"

copyright 1997 Curcio Audio