|
|
DANIEL II REFERENCE PREAMPLIFIER SPECIFICATIONS | ||
| LINE STAGE AMPLIFIER SPECIFICATIONS | |||
| Frequency Response | 5 Hz - 120 KHz | +/- 0.05db | |
| Separation | > 85db | to 20 KHz | |
| THD | 0.006 % | @ 1 KHz | |
| IM | 0.008 % | SMPTE | |
| Gain | 20 db | Adjustable to 30db | |
| Signal to Noise Ratio | 0.4 uV (RMS) | -68db | |
| Input Impedance | 1 MEG Ohm | Adjustable | |
| Output Impedance | 300 Ohms | ||
| Output Voltage | 180 Volts P-P | ||
| Tube Compliment | 1 X E81CC | Alt 1X 6922 / 7308 | |
| Board Dimensions | D2-LN (Amplifier Module) | 6.5" X 3.5" | |
| D2-REG (Pre Regulator Module) | 7" X 2.5" | ||
| D2-MPS (Power Module) | 5" X 3.5" | ||
| PHONO STAGE SPECIFICATIONS | |||
| Frequency Response | 20 Hz - 20 KHz | RIAA: +/- 0.03 db | |
| Separation | > 85 db | to 20 KHz | |
| THD | 0.008 % | @ 1 KHz | |
| IM | 0.01 % | SMPTE | |
| Gain | 46 db | @ 1 KHz | |
| Signal to Noise Ratio | 0.12 uV (RMS) | -78 db | |
| Input Impedance | 47 K Ohm | Adjustable | |
| Output Impedance | 300 Ohms | ||
| Output Voltage | 185 V (P-P) | ||
| Tube Compliment | 1 X 6DL4, 2 X E81CC | Alt: 2 X 6922 / 7308 | |
| Board Dimensions | D2-PHLN (Phono & Line) | 9.5" X 7" | |
copyright Curcio Audio 1998