|
CAE-ST-70 STEREO POWER AMPLIFIER SPECIFICATIONS |
| AMPLIFIER (Complete) SPECIFICATIONS |
| Power Output |
30 Watts / Channel |
RMS |
| THD |
0.05 % |
| IM (SMPTE) |
0.08 % |
| Power Bandwidth |
25 Hz - 18 KHz |
| Input Sensitivity |
1.8 Volts |
@ Rated Output |
| Input Impedance |
470 K Ohms |
| Overall Negative Feedback |
10 db |
| Slew Rate |
10 V/ uS |
| Rise Time |
7 uS |
| Hum & Noise |
0.5 mV |
| PS Regulation |
0.01 % |
| Power Requirements |
110 - 120 VAC |
| Tube Compliment |
4 X 6922, 4 X EL34 |
|
|
| DRIVER STAGE AMPLIFIER SPECIFICATIONS (#PWB-3A) |
| Frequency Response |
10 Hz - 90 KHz |
+/- 0.1db In Circuit |
| Separation |
> 95db |
to 20 KHz |
| THD |
0.33 % (Open Loop) |
@ 1 KHz |
| IM |
0.41 % (Open Loop) |
SMPTE |
| Voltage In (Max) |
14 Volts (P-P) |
| Voltage Out (Max) |
390 Volts (P-P) |
| Input Impedance |
470 K Ohm |
Adjustable |
| Output Impedance |
24 K Ohms |
| Tube Compliment |
4 X 6922 |
Alt 4 X 6CG7 |
| Board Dimensions |
PWB-3A (Driver Module) |
5.5" X 3-3/8" |
|
| POWER / REGULATOR STAGE SPECIFICATIONS (# PWB-S7P) |
| Input Power Req |
430-0-430 VAC @ 300 mA |
High Voltage |
| 50 VAC @ 20 mA |
Output Stage Bias |
| 5 VAC @ 30 mA |
Regulator Bias |
| Regulated Output |
425 VDC @ 200mA |
Plate |
| 425 VDC @ 25mA |
Screen Grid |
| -45 VDC @ 12mA |
Bias |
| Board Dimensions |
PWB-S7P (Power / Regulator Module) |
9" X 5" |